E-cigarettes Atomizer Cotton Core Knowledge

1. Why does it have a burnt smell when using cotton as an atomizing core?

The biggest reason is that the instantaneous output power is too high. However, the state of the cotton core in the hot filament is too tight, resulting in poor oil conduction, and the hot filament will start to dry the cotton core. There will also be this kind of burnt smell, which can be solved by reducing the power or re-adjusting the tightness of the cotton core.

2. How to avoid burnt smell when assembling the atomizer?

After installing the heating wire and cotton core, do not directly close the oil tank. Put a few drops of e-liquid on the heating wire, and then burn it to see the effect. If the cotton core shows signs of blackening, readjust the tightness of the cotton core. Turn off the fuel tank until it is adjusted to the power you are used to, and there is still no sign of confusion.

3. Is it difficult for novices to make cores by themselves?

To put it bluntly, the hot wire is just going around a few times without any technical content. The first few are not well wound, it doesn’t matter if the winding is not tight, it’s normal. Practice a lot, and you will find how cute you are when you asked this question.

4. Can carbon fiber heating wire be used on the atomizer?

Can. There are many brands of heating wire materials, and we recommend that players choose products with relatively high cost performance. If you have special silk on hand, please understand in detail that the material is indeed non-toxic after high temperature combustion, and then choose to use it.

5. Why does it smell strange when I use cotton as a core?

That’s because the cotton core contains oil before it is used, and it will produce a smell after high temperature atomization. It is recommended that the newly installed cotton wick be fully burned several times with some smoke oil before installing it in the oil tank, and there will be no such smell. The best way is to boil the cotton with pure water first, and then dry it, it will not taste like this. If it is troublesome, just take a few mouthfuls and there will be no cotton smell.

6. Is the number of turns the better?

Absolutely not. For the same type of heating wire, the larger the coil diameter, the higher the resistance. The higher the number of turns, the greater the resistance. The larger the resistance, the smaller the heat generated under the same power. Choosing the resistance value that suits your atomizer and taste is the right one, and needs to be adjusted and tried. Of course, the smaller the resistance value is, it is also wrong. The resistance value and the output power of your device and the final mouth induction should be balanced and enjoyable.

7. What are 0.2, 0.25, 0.3?

When making heating wires. There are differences in diameter, circle diameter, and number of circles. Generally, numbers less than 1MM refer to the diameter of the hot wire. Around 2MM refers to the circle diameter. Such as:
Hot wire setting data:
A, 0.2, 3.0, 8, 1.5 ohms. Reading it is the 0.2 mm diameter wire of factory A, and the final data of 1.5 ohms is obtained by winding 8 turns with 3.0 mm diameter.
G, 0.32, 2.5, 7, 1.2 Euro. Reading it is the 0.32 mm diameter wire of G factory, with a circle diameter of 2.5 mm, winding 7 times to get the final data of 1.2 ohm.

8. Does the heating wire of different resistance have a big impact on the taste?

Very influential. Some smoke oils can feel the style with normal values. But some e-liquids require high power to exert their full strength. There is currently no standard to specify which value should be used for which e-liquid. Because there are differences between people, we will consider making the specific e-liquid on specific equipment in the future.

9. After the heating wire is burned, there are many black substances on it, is it normal?

This black substance is the carbon deposit on the hot wire after high-temperature combustion. If it is not generated in a short time, it is normal. It is also a signal that you need to replace the heating wire.

10. What is A wire? G wire?

Refers to the brand of heating wire. A silk refers to Kanthal, which is also called Kanthal in China. It is very cost-effective and is also the mainstream silk. G wire refers to G-PlatWire, an American e-cigarette competition-grade hot wire. The silk is super soft and produces a lot of smoke. One word: expensive.

11. How to make the core of XXX atomizer?

The atomizer has various core making methods, including winding type, plug-in type, vertical type and reel type. Moreover, the performance of these forms on different atomizers is not the same. Try a lot of different methods on your atomizer, you may receive more surprises. We call it: toss.

12. What is the difference between iron wire and nickel wire?

Iron-chromium-aluminum resistance is high and heats up slowly, but there are no toxic substances after rigorous testing, and carbon monoxide is also very low. Nickel-cadmium wire is often used for acrylic cutting and so on. It has a fast heating and low resistance, but it has been subjected to non-rigorous experiments and certain toxic substances will be released during high-temperature heating.

13. How many tanks of cotton and cores are generally pumped for oil change?

According to the frequency and output power you use. There is no clear standard for several tanks of oil and a change of core. Depending on the level of production, some players need to change it once a day, or only once in ten days. However, there is no harm in changing the hot wire and cotton core frequently, that is, you can enjoy the freshest taste and exercise your proficiency. Experience is accumulated in disassembly and disassembly.

14. What is double stranded wire, braided wire? Are there any benefits?

Double-strand yarn refers to the hot wire made of single-strand yarn side by side. Braided silk means that the three strands of silk are braided into a braid before being made. With the same loop diameter and number of turns, these fancy yarns will not have any different taste than single-stranded yarns. The only advantage is to exercise your hands-on ability, and the final result is pleasing to the eye.

15. XXX’s wire, how many turns is suitable?

Now electronic cigarette winding technology is very mature. The data provided by others is only used as a reference. Others will not understand your own equipment, your own silk, your own taste and affordability. Using online hot wire production tools can help you understand your needs intuitively.

16. Which one is better, thick wire or thin wire?

The correct answer is that there is nothing comparable. The final value of 2X4 and 4X2 is the same, and the default resistance value of thick wire is lower. Choose the thickness only because of your own needs or production requirements. The only difference is that if the thick wire wants to meet the resistance requirements of the thin wire, it needs more turns, and the more turns, the larger the contact area between the hot wire and the cotton core. The smoke is even greater.

17. What is a net? Steel wire? Rope?

They are different ways of playing the atomization cores. Although they are called differently, they are equivalent to cotton. These special materials often require special experience and skills when making them, and novices generally use cotton.

18. Is the vertical coil good?

Generally used in vertical oil-conducting atomizers. This production method is very characteristic, the oil guiding speed is stable, the amount of smoke is relatively large, but the production is relatively complicated, and the finished product is pleasing to the eye. However, it is a disadvantage that the pipe cannot be laid flat after installation. There are also players who try to solve the problem of flat placement, but most of the results are not ideal.

19. What is burning silk burning net?

Whether it is heating wire or other core-making materials, there will be some impurities on the surface before it starts to conduct heat. Such as engine oil, coating residue and the like. So before installation, use the spray gun to burn the hot wire before installing, which can minimize this kind of impurities. Hot wire or other heat transfer medium that is not burned in advance, directly sprayed with e-liquid for atomization, will have a very choking metallic taste, which will affect your experience.